LOOKING FOR MDF?
MDF
Premium MDF in Egypt
MDF Specification
Advantages of MDF:
-
- MDF is an engineered wood composite that is similar to particle board, but is much denser and stronger than particle board.
- Because it’s composed of such small wood fibers, there’s no wood grain in MDF. And because it’s pressed so hard at such high temperatures, there are no voids in MDF like you find in particle board. Here you can see the visible difference between particle board and MDF, with MDF on the top and particle board on the bottom.
- MDF can be purchased in different thicknesses.
- The surface of MDF is very smooth, and you don’t have to worry about knots on the surface.
- Because it’s so smooth, it’s a great surface for painting.
- MDF is very consistent throughout, so cut edges appear smooth and won’t have voids or splinters.
- The consistency and smoothness of MDF allows for easy cutting of detailed designs (such as scrolled or scalloped designs) using a scroll saw, band saw, or jigsaw.
Disadvantages of MDF:
-
- Just like particle board, MDF will soak up water and other liquids like a sponge and swell unless it’s very well-sealed on all sides and edges with primer, paint, or another sealing product.
- Because it consists of such fine particles, MDF doesn’t hold screws very well, and it’s very easy to strip the screw holes.
- Because it’s so dense, MDF is very heavy. This can make it more difficult to work with, especially if you don’t have a helper who can help you lift and cut the large sheets.
- MDF can’t be stained. Not only does it soak up stain like a sponge, but also because there’s no wood grain on MDF, it looks awful when it’s stained.
- MDF contains VOCs (urea-formaldehyde). Off gassing can be greatly minimized (but probably not eliminated) if the MDF is encapsulated with primer, paint, etc., but care needs to be taken while cutting and sanding to avoid inhalation of the particles. I recommend cutting and sanding outside while wearing a particle mask
Common Uses:
-
- Veneer
- Decorative edges
Get In touch below. Ask Any Question or Get a Free Quote
Call Us
Office Location
Industrial zone, beside Honda Agency, Obour City, Al Qalyubia Governorate
Working Hours
Monday to Saturday: 9am - 5pm
info@bakkahlumber.com